Category
- dAluminium Cast Elbows Aluminium Cast Elbows
- dAluminium Dome Caps Aluminium Dome Caps
- dAluminium Tube & Bends Aluminium Tube & Bends
- dWastegate Piping Kits Wastegate Piping Kits
- dDownpipe Kits Downpipe Kits
- dExhaust Flexi & Bellows Exhaust Flexi & Bellows
- dTube Reducers Tube Reducers
- dStainless Tube & Bends Stainless Tube & Bends
- dMild Steel Tube & Bends Mild Steel Tube & Bends
- dFlanges Flanges
- dGaskets & Gasket Kits Gaskets & Gasket Kits
- dManifold Build Kits Manifold Build Kits
- dManifold Collectors Manifold Collectors
- dSINCO Turbo Manifolds SINCO Turbo Manifolds
- dSteampipe & Bends Steampipe & Bends
- dStuds & Locknuts Studs & Locknuts
- dVbands - Turbo Outlet Vbands - Turbo Outlet
- dVbands - Universal Vbands - Universal
- dVbands - Weld Flanges Vbands - Weld Flanges
- dWeld Ons - O2 Sensor Weld Ons - O2 Sensor
- dPay The Difference Pay The Difference
Subcategory
- dFord Ford
- dMazda Mazda
- dMitsubishi Mitsubishi
- dNissan Nissan
- dToyota Toyota
2 Bolt - Exhaust Flanges & Exhaust Flange Kits
These universal exhaust flanges are used when fabricating an exhaust system. It is recommended to have your exhaust in sections to ena
$28.70
K
d
ADD
MORE INFO G
CNC 4 Cylinder & Rotary Exhaust Manifold Flanges
Please note that the machined side of the flange is intended for welding your tube or pipe straight to it. Once welded the un-pre
$56.00
K
d
ADD
MORE INFO G
CNC 6 Cylinder Exhaust Manifold Flanges
Please note that the machined side of the flange is intended for welding your tube or pipe straight to it. Once welded the un-pre
$74.00
K
d
ADD
MORE INFO G
CNC Turbo Inlet Flanges
Please note that the machined side of the flange is intended for welding the collector straight to it. Once welded the un-prepped (opp
$40.00
K
d
ADD
MORE INFO G
Dome Cap-Aluminium
For the use in fabrication of alloy catch cans, fuel surge
tanks &
fluid reservoirs. These caps are pressed and the welding face is
$15.60
K
d
ADD
MORE INFO G
Exhaust Bellow Stainless Steel - 304
If you are setting up an external wastegate return pipe back into your exhaust then a exhaust bellow is something you will want to con
$50.00
K
d
ADD
MORE INFO G
Rotary Exhaust Manifold Gasket
Multi Layer Stainless (x5)These are sold as Individual pieces - Will suit 12a -13b - 20b - 26b etc62mm Port Hole
12a exhaust m
$44.05
K
d
ADD
MORE INFO G
Stainless Steel Exhaust Flexi
Exhaust Flexi joints are recommended in an exhaust system to help stop the weight and vibration of the exhaust transferring vibration
$40.00
K
d
ADD
MORE INFO G
Stud - Locknut - Washer Combo
Save time & buy your studs - locknuts & washers together in one easy kit!
These turbo studs are ideal for fitting any turbo to
$8.30
K
d
ADD
MORE INFO G
Turbo Outlet Flanges
Please select your down pipe flange from the drop down box
Laser cut flanges
10mm Mild steel
T3/T4 5 boltEVO 4-9 Ex
$30.00
K
d
ADD
MORE INFO G
1JZ Vvti - Factory Position - Turbo Manifold
After years of development of our merge collector from extensive dyno time and feedback from the top tuners in the country, we have fo
$1,259.25
K
d
ADD
MORE INFO G
1JZ-GTE (non vvti) - Turbo Manifold
After years of development of our merge collector from extensive dyno time and feedback from the top tuners in the country, we have fo
$1,500.75
K
d
ADD
MORE INFO G
1JZ-GTE Vvti - Turbo Manifold
After years of development of our merge collector from extensive dyno time and feedback from the top tuners in the country, we have fo
$1,500.75
K
d
ADD
MORE INFO G
2 Bolt Exhaust Gaskets - 2" - 2.25" - 2.5" & 3"
2 bolt exhaust gaskets to suit our range of exhaust flanges, please see below for the bolt center measurements
Universal
$4.50
K
d
ADD
MORE INFO G
2 Bolt Wastegate Blank Flange - 38mm
Lazer Cut
8mm Mild Steel
As used on our turbo manifolds so perfect fitment
$11.00
K
d
ADD
MORE INFO G
2 bolt Wastegate Flange - 38mm
Please choose your flange type from the drop down box:
Cnc Machined = 12mm Mild steelAs used on our turbo manifolds so perfect
$11.00
K
d
ADD
MORE INFO G
2 Bolt Wastegate Gasket - 38mm
To suit 38mm wastegate flanges & wastegates
Single layer stainless steel
$11.00
K
d
ADD
MORE INFO G
2 Rotor T3 - Gasket Stud Locknut Kit
Full replacement stud and gasket kit to suit 2 Rotor Engines
PLEASE NOTE:
These are made for aftermarket applications and
$185.05 $160.99
K
d
ADD
MORE INFO G
2 Rotor T3 Twin scroll - Gasket Stud Locknut Kit
Full replacement stud and gasket kit to suit 2 Rotor Engines
PLEASE NOTE:
These are made for aftermarket applications and
$185.05 $160.99
K
d
ADD
MORE INFO G
2 Rotor T4 - Gasket Stud Locknut Kit
Full replacement stud and gasket kit to suit 2 Rotor Engines
PLEASE NOTE:
These are made for aftermarket applications an
$185.05 $160.99
K
d
ADD
MORE INFO G
2 Rotor T4 Twin scroll - Gasket Stud Locknut Kit
Full replacement stud and gasket kit to suit 2 Rotor Engines
PLEASE NOTE:
These are made for aftermarket applications and d
$185.05 $160.99
K
d
ADD
MORE INFO G
Prices are in New Zealand Dollars and include GST
Terms & Conditions
