SORT BY
H
  • Best match
  • Lowest price first
  • Highest price first
  • n
  • m

Category

Refine Search

Subcategory

CLEAR FILTERS Circle Cross Transparent Centre Created with Sketch.
 

6 Bolt Turbo Outlet Gasket - Holset

To suit Holset HRC 40rs Turbos Single layer101mm bolt centers (straight across)50mm bolt centers (next to each other)
$25.50
MORE INFO G

Out of stock

 

6-1 Merge Collector - Small Runner - 1 1/4 inch (35mm) ID

All collectors are made to order - This means there will be a 7 working day wait to be manufactured After years of R&D we have fo
$240.00
K d ADD MORE INFO G

 

 

63mm Turbo Outlet Gasket

Commonly used for Garrett ta3410 , masterpower , Holset & others Single layer stainless Outlet hole size = 60mm Stud centers (straight
$12.00
K d ADD MORE INFO G

 

 

76mm Turbo Outlet Gasket - 35r

Single layer stainless Outlet hole size = 76mm Stud centers (straight across) = 70mm Stud centers (Diagonally) = 100mm
$12.00
K d ADD MORE INFO G

 

 

Aluminium Bend - 45 Degree

Our aluminium tube bends are ideal for intercooler piping. These are designed to be cut and welded together to the desired angle
$12.90
K d ADD MORE INFO G

 

 

Aluminium Bend - 90 Degree

Our aluminium tube bends are ideal for intercooler piping. These are designed to be cut and welded together to the desired angle
$20.00
K d ADD MORE INFO G

 

 

Aluminium Bend- 135 Degree

Our aluminium tube bends are ideal for intercooler piping. These are designed to be cut and welded together to the desired angle
$29.25
K d ADD MORE INFO G

 

 

Aluminium Reducers - Long Series

Long Series = The Reducer length is 4" long These aluminium reducers are ideal for inter-cooler piping where you need to step up
$18.00
K d ADD MORE INFO G

 

 

Aluminium Reducers - Medium Series

Medium Series = The Reducer length is 2" long These aluminium reducers are ideal for inter-cooler piping where you need to step u
$15.00
K d ADD MORE INFO G

 

 

Aluminium Reducers - Medium Series

Medium Series = The Reducer length is 2" long These aluminium reducers are ideal for inter-cooler piping where you need to step u
$18.00
K d ADD MORE INFO G

 

 

Aluminium Reducers -Long Series

Long Series = The Reducer length is 4" long These aluminium reducers are ideal for inter-cooler piping where you need to step up
$18.00
K d ADD MORE INFO G

 

 

Aluminium Tube - 500mm

Our aluminium tubes are ideal for intercooler piping, breather tank or fluid reservoir fabrication. The tubes can be used in conjunct
$17.70
K d ADD MORE INFO G

 

 

Cast Aluminium Elbows - 90 Degree

These 90 degree aluminum cast elbows are ideal for welding to the compressor cover of your turbo charger, completely eliminating the c
$32.00
K d ADD MORE INFO G

 

 

Copper Locknut M10x1.25

For more information on Locknuts - Click Here Helps prevent the nut from loosening under high heat and vibration condi
$2.50
K d ADD MORE INFO G

 

 

Copper Locknut M10x1.5

Helps prevent the nut from loosening under high heat and vibration conditions Has a section on the end of the nut that locks on
$2.50
K d ADD MORE INFO G

 

 

Copper Locknut M8x1.25

Helps prevent the nut from loosening under high heat and vibration conditions Has a section on the end of the nut that locks on
$1.90
K d ADD MORE INFO G

 

 

EFR Turbo Oultet Flange & Clamp

Machined to suit EFR turbine outlet flange There is no recess machined on the vband flange, the face is flat = Photo shows the vband f
$70.00
K d ADD MORE INFO G

 

 

Evo 1-9 Sump - Oil Drain Flange

This flange bolts to the sump and is used for fabricating a custom oil return line, the bolt holes are 7mm so that a copper or fibre w
$8.50
K d ADD MORE INFO G

 

 

Evo 1-9 Sump Oil Drain Gasket

Made from fiber material Center hole = 13mm Bolt hole centers = 45mm Bolt holes = 7mm
$5.00
K d ADD MORE INFO G

 

 

Garrett 35R & G Series - Turbo Outlet Vband & Clamp

Machined to suit the locating recess for the rear of the gt35/82, gt30/76, gtw38/84 & g series turbine outlet Will only work with
$70.00
K d ADD MORE INFO G

 

 

Holset 35/2 & 40rs Turbo Outlet Vband & Clamp

To suit the turbo outlet on the HRC35/2 & HRC40rs also commonly known as (Hx35 or Hx40) The Holset rear housing v-band size comes
$80.00
K d ADD MORE INFO G

 

NEXT G
f Prev 22-42 of 127
Prices are in New Zealand Dollars and include GST | Terms & Conditions
 

This product has been added to your cart

CHECKOUT