Category
- dAluminium Cast Elbows Aluminium Cast Elbows
- dAluminium Dome Caps Aluminium Dome Caps
- dAluminium Tube & Bends Aluminium Tube & Bends
- dWastegate Piping Kits Wastegate Piping Kits
- dDownpipe Kits Downpipe Kits
- dExhaust Flexi & Bellows Exhaust Flexi & Bellows
- dTube Reducers - Cones Tube Reducers - Cones
- dStainless Tube & Bends Stainless Tube & Bends
- dMild Steel Tube & Bends Mild Steel Tube & Bends
- dFlanges Flanges
- dGaskets & Gasket Kits Gaskets & Gasket Kits
- dManifold Build Kits Manifold Build Kits
- dManifold Collectors Manifold Collectors
- dSINCO Turbo Manifolds SINCO Turbo Manifolds
- dSteampipe & Bends Steampipe & Bends
- dStuds & Locknuts Studs & Locknuts
- dVbands - Turbo Outlet Vbands - Turbo Outlet
- dVbands - Universal Vbands - Universal
- dVbands - Weld Flanges Vbands - Weld Flanges
- dWeld Ons - O2 Sensor Weld Ons - O2 Sensor
- dPay The Difference Pay The Difference
Subcategory
- dFord Ford
- dMazda Mazda
- dMitsubishi Mitsubishi
- dNissan Nissan
- dToyota Toyota
2 Rotor T6 - Gasket Stud Locknut Kit
Full replacement stud and gasket kit to suit 2 Rotor Engines
PLEASE NOTE:
These are made for aftermarket applications and
$185.05
K
d
ADD
MORE INFO G
2 Rotor T6 Twin scroll - Gasket Stud Locknut Kit
Full replacement stud and gasket kit to suit 2 Rotor Engines
PLEASE NOTE:
These are made for aftermarket applications and
$185.05
K
d
ADD
MORE INFO G
2-1 Merge Collector
After years of R&D we have found the perfect balance between high flow and boost control
For use with T3 Twin Scroll or T4 Twin
$160.00
K
d
ADD
MORE INFO G
2JZ-GTE Turbo Manifold
After years of development of our merge collector from extensive dyno time and feedback from the top tuners in the country, we have fo
$1,397.25 $1,215.61
K
d
ADD
MORE INFO G
3-1 Merge Collector (Even Side) = x1 Pair
After years of R&D we have found the perfect balance between high flow and boost control
Even side collector = x3 of the collecto
$178.00
K
d
ADD
MORE INFO G
3-1 Merge Collector (High Side) = x1 Pair
After years of R&D we have found the perfect balance between high flow and boost control
High side collector = x2 of the collec
$178.00
K
d
ADD
MORE INFO G
3s-gte Caldina T3 - Turbo Manifold
After years of development of our merge collector from extensive dyno time and feedback from the top tuners in the country, we have fo
$1,069.50 $930.46
K
d
ADD
MORE INFO G
4-1 Merge Collector (Even Side)
After years of R&D we have found the perfect balance between high flow and boost control
For use with T2 or T3 turbo flanges -
$160.00
K
d
ADD
MORE INFO G
4-1 Merge Collector (High Side)
After years of R&D we have found the perfect balance between high flow and boost control
For use with T2 or T3 turbo flanges
$160.00
K
d
ADD
MORE INFO G
40mm Weld Flange - Wastegate Inlet
40mm vband weld flange - Inlet only
Used to attached your wastegate to turbo manifold
Tial mvs-38 and Turbosmart 40mm use th
$17.50
K
d
ADD
MORE INFO G
45mm Weld Flange - Wastegate Inlet
45mm vband weld flange-Inlet only
Used to attached your wastegate to turbo manifold
Tial mvr-44 , Turbosmart 45mm & Precisio
$17.50
K
d
ADD
MORE INFO G
4G63 - Exhaust Manifold Gasket
Our multi layer stainless steel exhaust manifold gaskets are an essential part of a reliable and long term seal when installing factor
$60.00 $54.00
K
d
ADD
MORE INFO G
4G63 - T3 - Gasket Stud Locknut Kit
Full replacement stud and gasket kit to suit Evo 1-9 and SINCO turbo manifold flange. All our turbo manifold flanges are tapped to = m
$195.80 $176.22
K
d
ADD
MORE INFO G
4G63 - T3 Twin - Gasket Stud Locknut Kit
Full replacement stud and gasket kit to suit Evo 1-9 and SINCO turbo manifold flange. All our turbo manifold flanges are tapped to = m
$192.80 $173.52
K
d
ADD
MORE INFO G
50mm Turbosmart Weld Flange - Wastegate Inlet
50mm Turbosmart vband weld flange - Inlet only
To attached your wastegate to turbo manifold
$25.80
K
d
ADD
MORE INFO G
6 Bolt Turbo Outlet Gasket - Holset
To suit Holset HRC 40rs Turbos
Single layer101mm bolt centers (straight across)50mm bolt centers (next to each other)
$25.50
MORE INFO G
Out of stock
6-1 Merge Collector - Small Runner - 1 1/4 inch (35mm) ID
After years of R&D we have found the perfect balance between high flow and boost control
For use with T3 and T4 single entry flan
$240.00
K
d
ADD
MORE INFO G
60mm Turbosmart Weld Flange - Wastegate Inlet
60mm Turbosmart vband weld flange - Inlet only
Used to attached your wastegate to turbo manifold
Please note: The Turbosmart 60mm
$28.90
K
d
ADD
MORE INFO G
63mm Turbo Outlet Gasket
Commonly used for Garrett ta3410 , masterpower , Holset & others
Single layer stainless
Outlet hole size = 60mm
Stud centers (straight
$12.00
K
d
ADD
MORE INFO G
76mm Turbo Outlet Gasket - 35r
Single layer stainless
Outlet hole size= 76mm
Stud centers (straight across) = 70mm
Stud centers (Diagonally) = 100mm
$12.00
K
d
ADD
MORE INFO G
Aluminium Bend - 45 Degree
Our aluminium tube bends are ideal for intercooler piping. These are designed to be cut and welded together to the desired angle
$12.90
K
d
ADD
MORE INFO G
Prices are in New Zealand Dollars and include GST
Terms & Conditions
